Hello everyone.I am working on a small project. Being that I can't afford a inflatable suit from kingy king and not to mention my mom would be like wtf why did a inflatable suit come in the mail for you? I have decided to make my own. I am taking 2 trashbags(for the legs) I cut it out to make legging parts and then have some elmer spray super glue and I sprayed the sides where it was open down and then did it again and made another layer. I am going to try it in a little when it's done drying but has anyone ever done this? oh and if its succesful I'll post pictures.
Im making home made inflatable pants(as we speak)
Thu, 05/21/2009 - 02:32
#1
Im making home made inflatable pants(as we speak)
Thu, 05/21/2009 - 03:44
#3
MixMaster wrote:
I admire you ingenuity, it may work if your careful how you cut the pattern. You can make it as big as you like, but I would'nt expect it to hold much pressure. Mist it with some soapy water after you're done to check for leaks and good luck ^_^
First try was unsuccessful but I have another idea rather then cutting out shorts.
Thu, 05/21/2009 - 16:12
#4
I've done something similar to this before but I used 2mil plastic sheeting from home depot and duct tape. But I believe it would also work(and look better) with some kind of adhesive glue. I was able to make an entire double layered suit and it held way more pressure than a normal latex suit and cost about $10 total to make. If you need some ideas or help on how to make it just leave me a message.
Thu, 05/21/2009 - 18:46
#5
citizensix wrote:
I've done something similar to this before but I used 2mil plastic sheeting from home depot and duct tape. But I believe it would also work(and look better) with some kind of adhesive glue. I was able to make an entire double layered suit and it held way more pressure than a normal latex suit and cost about $10 total to make. If you need some ideas or help on how to make it just leave me a message.
Do you have an AIM sn?
Thu, 05/21/2009 - 19:16
#6
It's citizensix@ymail.com, you have to do the ymail.com also or it won't find it I don't think.
I admire you ingenuity, it may work if your careful how you cut the pattern. You can make it as big as you like, but I would'nt expect it to hold much pressure. Mist it with some soapy water after you're done to check for leaks and good luck ^_^