A Message From Kinky King Latex

32 posts / 0 new

Mon, 03/31/2008 - 14:56

kuumuzu

Hey,

Just wanted to let people know that the owner of Kinky King Latex has been trying to join this site but hasn't been approved yet as a member as he's having a great deal of trouble registering...
He has asked me to pass on this message to everybody:

Hello everyone! My name is Brian and I'm the owner of Kinky King Latex. Our website is located at www.kinkykinglatex.com. I've read the forums here over the past few months with great interest and have tried to create an account, but it seems I've had no response from Luther - maybe he is busy or out of town - I don't know - so I decided to ask someone else to make this post for me.

I am confident in saying that we are now making the best latex inflatables available anywhere in the world. I think many of you have already seen our Youtube page where we've demonstrated our inflatable catsuits with a couple of very cute girls. We are now working on a couple of really really super huge inflatable suits - so that the person inside will look like a ball - and we are also nearly finished with our first "blueberry" suit. A shirt with inflatable breasts is also on its way. You can bet we'll put videos of those on Youtube right when we finish them.

I personally invite all of you to take a look at the inflatables page of our website - and to email me personally with any questions you may have: kinkykinglatex@gmail.com.

Mon, 03/31/2008 - 17:51

LittlePumpkin

I had that problem too. :(

I can't wait to see the ball-shaped suit!!!! :D

Mon, 03/31/2008 - 19:18

kuumuzu

LittlePumpkin wrote:

I can't wait to see the ball-shaped suit!!!! :D

Me too, it sounds awsome doesn't it. ^_^

Going to have to start saving up all of my monies again. But it'll have to wait a little while, well until after my Japan trip in July... ^_^;

Bloody money... >_<;

Mon, 03/31/2008 - 23:01

Fukureruba

Coolioskers! I can't wait to talk with Brian....I have some questions. :wink:

I'm also quite curious about his ball shaped suits.

Tue, 04/01/2008 - 00:53

harrisonford08

Sounds like a nice opportunity. The suits I saw on youtube looked very nice.

http://harrisonford08.deviantart.com/ http://groups.yahoo.com/group/ijartist/

Tue, 04/01/2008 - 02:10

Hercmech

Yea.......how about a really, really big inflatable suit? Will the ball shaped one be one that just has your hands, feet, and head sticking out?

Tue, 04/01/2008 - 02:36

Anonymous

if the ball shaped suit has your head, hands, and feet all sticking out then they should try covering the ball suit with clothes so it looks like the person inside the ball suit inflated! :D

Tue, 04/01/2008 - 09:10

LittlePumpkin

deven872002 wrote:

if the ball shaped suit has your head, hands, and feet all sticking out then they should try covering the ball suit with clothes

yeah! :D

Tue, 04/01/2008 - 15:46

kuumuzu

Glad to see people are taking a really keen interest in this. ^_^

I'm sure Brian will be extatic when he finally gets registered and is able to comment here rather than just read all our crazy replies! ^_^

Latex... the possibilities are endless.

Tue, 04/01/2008 - 19:08

#10

Roger64

Quote:

if the ball shaped suit has your head, hands, and feet all sticking out then they should try covering the ball suit with clothes

Oh yeah, if there was a way the wearer, a pretty female, could inflate and rip out of those that would be great!

Tue, 04/01/2008 - 22:53

#11

Mentalyinsane

sounds great. but can you roll around without it popping?

The name's Noitalfin, http://noitalfin.deviantart.com/

Wed, 04/02/2008 - 17:00

#12

kuumuzu

Mentalyinsane wrote:

sounds great. but can you roll around without it popping?

If both the inner and outer were made of the thickest latex, then that could be possible... though the air pressure would have to be really high too to make it quite solid.

I'd give that a miss though. I'd probably end up rolling onto my head and get stuck there. ^_^;

Wed, 04/02/2008 - 17:15

#13

kinkykinglatex

Alright! Finally my account works! Thank you Kuumuzu for posting for me! In response to people's questions/comments:

1. Ask anything about the ball shaped suits. We should finish one in less than a week from now - so after I put it up on Youtube, I'd be interested in hearing comments and ways to improve it.

2. As for the "ball suit" we are trying to make one right now for a guy that would leave him with his head feet and hands sticking out. Hopefully the suit will be a big hit!

3. About the female wearing it and "ripping" out of it... well... do you mean popping it? Seems that would be quite bad for business!

4. As for rolling around - as Kuumuzu stated - we would have to make it out of heavier latex - .8mm or 1.2mm and then it would probably involve multiple chambers to keep the air pressure at an amount that would support the weight of a person. Valve location would also have to be on the top of the shoulder, so it wouldn't get "run over".

5. Wait until you see the next girl I've got lined up to demonstrate the new inflatable suits!

6. Keep the questions coming!

7. This is a direct link to our inflatables page - but it will "grow" to include several big suits in the next few weeks!! http://www.kinkykinglatex.com/product_nei.asp?classid=80

8. Thank you everyone for the warm welcome here.

9. Goodnight!

Wed, 04/02/2008 - 19:20

#14

mosherballoon

kinkykinglatex wrote:

3. About the female wearing it and "ripping" out of it... well... do you mean popping it? Seems that would be quite bad for business!

I think what roger64 ment was to have clothes over the top of the suit that rip off :)

Wed, 04/02/2008 - 21:15

#15

Anonymous

Will you guys have a girl model in the ball suit after its out?

Wed, 04/02/2008 - 23:16

#16

Fukureruba

Hi Brian...

Welcome to the site!

My biggest question has to do with weights of the latex in the inflatable suits. I notice that the 'really, really big inflatable suit' (and the standard inflatable suit as well) is listed as only being .4mm latex. Can they be constructed out of heavier latex for increased durability? What are the pros and cons of using heavier latex?

Second question has to do with valve placement...especially on the ball-shaped suit. Can the valve be placed near a hand so that it can be manipulated if the wearer is 'going solo"?

Third question would be can the suits be worn in water as long as all pertinent safety measures are observed? I think I read somewhere that latex suits can be worn in water, but extra care has to be observed not to allow any water to get into the interior of the inflatable sections.

Fourth question is, do you do suit repairs, if your customers get a little to crazy and, say, tear up a zipper or blow out a seam?

That's about it for now. Thanks!

Thu, 04/03/2008 - 15:21

#17

Roger64

Quote:

3. About the female wearing it and "ripping" out of it... well... do you mean popping it? Seems that would be quite bad for business!
I think what roger64 ment was to have clothes over the top of the suit that rip off Smile

Yeah I meant clothes, they'd probably have to be weak ones, I wouldn't want the lass to get hurt. I'm actually the same guy who sent you a note on Youtbue asking about putting a large bikini over the suit. Oh no I dwell here to huh? Again sorry if I misunderstood how many clips you had of the Cute Asian suit wearer. But don't blame me if I'm crossing my fingers on her returning.

Ripping out of a suit would indeed be bad for business.

Thu, 04/03/2008 - 15:21

#18

Roger64

Quote:

3. About the female wearing it and "ripping" out of it... well... do you mean popping it? Seems that would be quite bad for business!
I think what roger64 ment was to have clothes over the top of the suit that rip off Smile

Ripping out of a suit would indeed be bad for business.

Thu, 04/03/2008 - 17:53

#19

kuumuzu

Ah, got it sorted! Awsome.
Welcome to the community at long last.

I don't really have any questions as of now so I'm just going to smile.

\\(^_^)//

Fri, 04/04/2008 - 02:45

#20

Kazuya

it should have bewbs xD

Mon, 04/07/2008 - 17:18

#21

kinkykinglatex

Hello again - to answer some more questions:

1. About heavier weight - yes I think it was just an oversight that we didn't add heavier latex options for those inflatable suits. For added durability, .8mm is a good choice and can take a bit more abuse than .4mm. I will say that we have never had a report of someone breaking one of our suits made from .4mm.

2. About floating in water - we've never tried this at the workshop - but I don't see why it would be an issue, as long as the water wasn't salt water and the floating wasn't for an excessively long period of time. You would want to place the valve somewhere high, perhaps on the shoulder, to avoid any water sneaking into the suit through it.

3. As for valve placement - it can be placed anywhere anyone wants. We just need a note about that in the comments field on the order form.

4. Yes - we can put "bewbs" onto one of them, and plan to do that soon.

5. About clothes that rip off of the girl... I'll see what I can do for the next videos...

6. Goodnight!

Brian

Tue, 04/08/2008 - 00:56

#22

srflour

Kazuya wrote:

it should have bewbs xD

Good call. Big Berrygirl-style ones would be excellent.

As for clothes, a thin stretchy leotard or swimsuit that induces some bulging around the edges and enhances the classic straining-to-get-out effect would add a a whole dimension.

I also recall that there are/were paper outfits around for ripping-clothes-off roleplaying in themes like "French Maid" and so on. Bursting out of one of these would potentially be one of the best "real" bits of inflation footage we've ever seen.

A big-boobed ball suit in a one-piece swimsuit bulging out of a bubbly bath would work for me big time. The wetness and dabs of foam everywhere would look good indeed.

"Continue the research..."

Tue, 04/08/2008 - 02:09

#23

Anonymous

another question is would you be able to tell us more about the "blueberry suit" you guys are also working on?

Will you guys have cute girls model in that one after its finished?
:)

Thu, 04/10/2008 - 13:36

#24

Kazuya

I hope the blue berry one is the one with boobs lol. I'd totally buy it!!!! And I plan to xD

Thu, 04/10/2008 - 17:04

#25

Roger64

Quote:

5. About clothes that rip off of the girl... I'll see what I can do for the next videos...

Shucks I really apprecaite it if you try it out. Course I'd understand if it didn't work out or you just didn't want to.

Someone mentioned a swim suit, I'd so be for a two piece. They also mentioned paper thin clothes like French Maid, ooh that'd be great.

And the big boog blueberry suit that I've heard other posters mention: sounds like major win.

I have you faved at Youtube, King.

Mon, 04/14/2008 - 06:20

#26

kinkykinglatex

Hey - glad it seems the blueberry suit will be a hit when its done! I will see what I can do about having the model wear a swimsuit that breaks when she inflates! Brian

Mon, 04/14/2008 - 07:59

#27

Inflate123

Brian, major props for shooting the videos out in public, like the McDonald's one. That's super brave...and very clever guerilla marketing. :)

Twitter | DeviantArt

Sun, 04/27/2008 - 16:01

#28

Sarboyo

Hey what ever happened to this.
The suits were suppose to be done in like less than a week, but it's been almost a whole month.

Sun, 04/27/2008 - 19:08

#29

Roger64

He did some more videos a few hours ago. Sadly no cute asian girl, and he is the one wearing the suit. It's a black one, check it out on youtbue.

Alas no female suit inflation.

Sun, 04/27/2008 - 19:52

#30

Inflate123

Give it time, Roger. Unless you're paying him for creating custom videos, it's a request line! :)

Twitter | DeviantArt

Sun, 04/27/2008 - 20:31

#31

Roger64

Yeah yeah so sue me, I got my hopes up and I'm selfish. Most of the suit inflation videos on youtube are of men.

Wait he does pay request videos? Damn gas prices I might consider it if a chick could do it.

Mon, 04/28/2008 - 02:47

#32

Inflate123

Heh, no, I don't think he does pay videos. There are other folks who do that stuff.

Twitter | DeviantArt

A Message From Kinky King Latex

Navigation

User login