Considering purchasing an inflatable suit from AngelDis (lustlatex.com). Does anyone have any reviews or opinions on them?

17 posts / 0 new

Thu, 02/05/2015 - 15:16

Another Canadian Guy

So after much consideration and debate, I am considering getting a cheaper inflatable latex suit. I saw one from the company "AngelDis" called around the internet an inflatable bag, and it sells for $300.

Now, first off, I know that it probably isn't going to be squeak latex quality. However, I am not looking for a big time commitment suit, just something smaller to get an idea what one is like. I thought it would be wise to ask this community to see if they had any opinions or reviews on them before purchasing, because I'd hate to spend $300 and get some terrible quality suit.

I'd like to say that I have considered Squeak Latex as a viable choice, but his inflatable suit, while I'm sure is a higher quality, starts at $800, and I don't know how long that willl take to make, where as it looks like this is ready to go.

I would also like to ask squeak latex if the design was theirs to begin with, because I don't want to be supporting a copy cat. I would take some consideration into it.

Again, I'm not looking for a super high quality suit (though, if it is super high quality for that price, count me in) so if anyone has any reviews or opinions on them, can y'all throw your words below these ones?

(Not on here too often, replies might be slow.)

Thu, 02/05/2015 - 15:31

Another Canadian Guy

Oh, duh! I forgot to post a link!

http://i.ebayimg.com/00/s/MTAwMFgxMDAw/z/LesAAOxyVLNS2KCG/$_57.JPG

(Edit 1: Also, if Squeak Latex/blowup_boy responds to this, please don't try to start something if he gives an honest opinion becasue he already owns a latex suit business. I said I wanted honest reviews and opinions, so I'm not expecting some "oh, I think the quality is fairly decent" if he doesn't actually think that. If he says something like "in my opinion, I found the quality to be pretty poor/terrible/sh**ty, just let him say that please. I want honest input here)

(Not on here too often, replies might be slow.)

Mon, 02/16/2015 - 23:06

(Reply to #2) #3

slayer

I got mine from Kinkyking latex back in 2008. It still works fine, no damage what so ever. If you maintain it ofcourse. Clean it with water and hang it up to dry and don't let it "rot inside" a plastic bag or moisture environment.

The suit in the picture looks very weird, like a big squared pillow :p but if that is your thing hehe

Hi my name is Tom. I run the inflatable chicks yahoo group

Wed, 02/18/2015 - 06:07

(Reply to #11) #4

Another Canadian Guy

I'd honestly prefer to get a huge latex suit from squeak latex, but that's also like $1100, maybe more because it's listed in American prices I think and I'm in Canada who's monetary value is, well to be frank, super low right now. I think it's like $ 0.75 American to $1.00 Canadian, so if that's correct, the suit might cost more like $1250.

i got this suit as its double layered and despite the shape being rather square, it still looks like a nice inflatable, but it's also super cheap and I want a beginner inflatable suit before I purchase a super large and expensive one.

TL:DR (shame on you)

this suit is super cheap and double layered, and while it's not the dream shape I want it's still alright and inflatable.

(Not on here too often, replies might be slow.)

Wed, 02/18/2015 - 23:35

(Reply to #12) #5

slayer

Waste of money if you ask me. The one I got from kinkyking was also custom made (I asked for bigger chest area and arms), and asked for extra thick latex material. It costed me 500 dollars. Size is XXXL, and it still lasts. Bought it in 2008.
High quality stuff.

Hi my name is Tom. I run the inflatable chicks yahoo group

Thu, 02/05/2015 - 20:03

blowup_boy

I have no issues with people purchasing products from other companies. ^__^ There are plenty of places to purchase inflatable suits from. I know I haven't been the best with responding and keeping up with emails, but I do appreciate anyone in the community coming to us.

Whilst I don't reccomend cheap chinese companies like this. What I don't like is purchasing products from companies that steal my designs.
This is actually a copy of one of my suits http://squeaklatex.com/redbag.php (even the same colour!)
Purchasing from people like this only harms folks like myself whom created the business to benifit people in the inflation community. I don't blame the Chinese for copying this stuff, they only do so when asked. So it always upsets me that someone took something I created and requested it to be copied to save a few bucks.

I can't fight it, I can't stop it. It's just disapointing.

I created this stuff so people like me could enjoy obtaining these suits and bringing their fantasies to life.

I have no personal opinion on this company you've linked too. But it wouldn't surprise me if it was simply a renamed catfish umbrella. What it's shown may not always be what you get with these sorts of companies.

I hope that doesn't sound to bias, I can't stop you purchasing from them. Just pointing out information is all.

Hisssssssssssss.. ...uh oh!!

Thu, 02/05/2015 - 21:38

(Reply to #3) #7

Another Canadian Guy

Well, this is information I asked for, and I am glad you were honest. To be honest on my end, I am quite dissapointed that they had copied it, because with that in mind I don't think I'll allow myself to purchase it. You've worked hard to build up your craft, and I do want to support you in the future. However right now I don't make a lot of money ($12 cad an hour) and it was more for the curiosity of trying one on than having to commit possibly $1000 or more for one (again, I understand the prices, they are fair. It's just too much for me at the moment.)

It just sucks though. Your original design and product goes for $800, and here I am presented with a $300 possible knockoff. Thanks for getting back to me Blowup_boy, and hopefully I can support your works in the near future.

(Not on here too often, replies might be slow.)

Thu, 02/05/2015 - 22:21

pballooned

Blowup_boy,
I'm thinking something you could do to avoid those copies is to offer two versions of your products: one is the good quality version you already make; the other is less resistent and lasts less, yet it is more economical.

I think people that can't afford the best quality ones will prefer to buy the economical versions from you rather than these other "outside" companies. After all you are one of "us". There is a better rapport :-)

Fri, 02/06/2015 - 10:19

(Reply to #5) #9

blowup_boy

Doesn't work like that I'm afraid. All comes down to cost of production. As it is my labor costs went up last year, but I decided not to increase my prices and instead make less profit.

as stated I can't stop companies like this I just hope that keeping my costs realistic to what I produce will encourage people to go with me. I simply can't compete with Chinese prices.

Hisssssssssssss.. ...uh oh!!

Fri, 02/06/2015 - 15:48

#10

Another Canadian Guy

So I had just gotten back from them after asking a few questions, notable I was wondering the latex quality. They said towards me asking the quality of the rubber:
.natural rubber , good quality ,please rest assured.

So, I am considering making a purchase, BUT, I am also considering sending some extra money to SqueakLatex for using his design. Since I don't know the best way to contact you Blowup_boy, can you send me a PM perhaps or let me know some way that works? I know that I don't have to send you any money, and it would be easier for me not to. However, if I am purchasing from someone who may have stole your design I think it would be at least a bit fair, or ethical to support the original creators works. I like to support the community, show that I care about the work they put in. If I have to give up another $100 for that or more to help keep someone in the game and rewarded for their efforts, then I'll try to do that.

(Not on here too often, replies might be slow.)

Sat, 02/07/2015 - 15:25

#11

ritties

I actually had this company build a design of mine and was quite happy with the results. The rubber quality is good and the construction was good in my opinion too. I'm quite happy with the suit they built for me. They actually are selling the suit as I designed it. Look for 16019, "inflatable costume without head" don't ask me why they called it that. If you do order one, please mention my email name and tell em I sent ya..

Ritties

Sat, 02/07/2015 - 17:35

(Reply to #8) #12

Another Canadian Guy

I had a look into that. While it doesn't look bad, I'm going to consider a full body one, like the huge blowup suit from Squeak Latex if I am to get a full body shape like that one. Thanks for the info though, and when I purchase mine, I'll send your regards. I take it your email name is ritties?

(Not on here too often, replies might be slow.)

Mon, 02/16/2015 - 08:07

#13

Another Canadian Guy

Suits been purchased, and it won't be made for at least a week as there is a chineese holiday going on.
Blowup_boy, if your reading this, can you please PM me so I can set up a sort of donation thing to you? I'd like to give you some cash at least if I am buying your design from someone else, and I want to still be able to support and pay you for your works.

(Not on here too often, replies might be slow.)

Sun, 03/08/2015 - 13:16

#14

MightyMike81

Does Kinky King Latex still make suits? I tried to google it but looks like the site no longer exists.

Mon, 03/09/2015 - 17:35

(Reply to #14) #15

Another Canadian Guy

I do not believe so, no. I could be wrong but I heard that they just kind of dissapeared.

(Not on here too often, replies might be slow.)

Sun, 03/29/2015 - 14:42

(Reply to #15) #16

MightyMike81

One alternative is a drysuit. I got a custom made drysuit from Aquala where I got it custom sized to a HUGE body builder. I just told them I was a weight lifter so he wouldn't question the odd dimensions.

It would be sweet if a kinky inflatable suit maker could get their hands on the same material (Aqua-ply) that Aquala uses and make a suit out of it. It would cost a fair amount but the benefit is the durability aspect.

I like this suit because it's very durable and stretchy so as result gets pretty big. To inflate it, I just shove the air hose down into suit via the throat.

The only down side is the fact that since it's a drysuit, it's single layer but that on it's own can be pretty fun since the suit gets hard to move around in when it's really pumped up. I think I paid about $1500 for it in 2010.

Mon, 03/30/2015 - 07:12

(Reply to #16) #17

Another Canadian Guy

That's not a bad suggestion, and thanks, but for me, the biggest killer to that idea is that it's only single layered. Now I'm not saying thats a bad thing, but for me it has to be double because the pressure you feel from it helps you to connect to it much better. Also, while that is a durable material, the latex just feels the best to me, as it kinda melts and becomes a second skin while I wear it (pretty confident I have a latex fetish now too).

Thanks for the suggestion.

(Not on here too often, replies might be slow.)

Considering purchasing an inflatable suit from AngelDis (lustlatex.com). Does anyone have any reviews or opinions on them?

Navigation

User login