I am new to this site! I have done belly expansions with water before, but i wanted to try something like any way to inflate my butt or put on a swimsuit, Nike Pro Shorts, leggings, etc., and inflate or fill something with water that would make it look real. I really love when someone's butt gets big by inflation like on those vids, but i wonder if there is really any possible way to actually do it. I like inflations in tight clothes cause it makes it look so big and that is what i do for my belly expansions with water. Anyone ever thought of this?
Butt Inflation or any way to inflate in something tight like Nike Pro Shorts or Tights?
Sun, 07/17/2016 - 18:44
#1
Butt Inflation or any way to inflate in something tight like Nike Pro Shorts or Tights?
Mon, 07/18/2016 - 00:57
#3
Try to use water to inflate something under clothing is a royal pain in the ass due to the weight of it all and gravity working against you constantly. Remember, a gallon of water weighs roughly 8 lbs, and anything you put it in is going to deform in shape unless it's properly supported evenly around the entire shape. Curious, but what videos do you speak of?
Mon, 07/18/2016 - 15:04
#4
Another Canadian Guy
Try to use water to inflate something under clothing is a royal pain in the ass due to the weight of it all and gravity working against you constantly. Remember, a gallon of water weighs roughly 8 lbs, and anything you put it in is going to deform in shape unless it's properly supported evenly around the entire shape.
This couldn't be more true. People think water inflation with a balloon works because it's soft, flexible, and inflatable, but gravity will pull it away from your body and will eventually deform.
Tue, 07/19/2016 - 21:04
#5
I don't think the realistic look has as much to do with whether air or water gets used, as it does the shape of the "recepticle," as it were.
With that in mind, I had an idea for an inflatable butt rig awhile back. The idea is to make polypropelene or polyurethane bladders corresponding to the shapes of the various glute muscles, as well as a broader bladder per side for the gluteal fat pad. You'd either need to get them custom-made or pick up a wheel impulse sealer to do it yourself, and don't forget nozzles while you're at it. Layer them in the appropriate order. Attach them to tights or a harness of some kind. Put another pair of tights on over that. I imagine there would be a lot of tubes to navigate at this point; attach those to an air compressor (for firm butt) or a low-pressure water pump (for jiggly butt). Et voila!
I understand that may not be the most practical solution. Good luck in any case.
Wed, 07/20/2016 - 01:54
#6
Hmm... the wheel impulse sealer got the wheels in my head turning. Though you may have to use a different method depending on what material you use, you could just cut a pattern out of viynl/pvc, making sure that it meets the measurements of your body and the general shape that you're going for and just fuse the two pieces together like you were making a pair of pants. I'm probably making this sound much easier than it is, but if you've ever had sew with needle and thread or used a sewing machine, this sealer looks like it would make things a friggn' breeze by comparrison.
T-T-T-T-T-T-T-T-TRIPLE POST COMBO!!!
BI.org’s very own metamorphic incomprehensible memetic fractal entity